Conoco Open Gear Lube 595 NC is a viscous, adhesive, asphaltic-based lubricant cut back with a volatile, non-chlorinated
solvent for ease of application. It is recommended for the
lubrication and cushioning of open and semi-enclosed gears,
such as those found in heavy equipment used in underground
and surface mines, in rock quarries and for excavation.
Open Gear Lube 595 NC is formulated with high-quality paraffinic
base oils, resins and asphalt. It is compounded with ashless
extreme-pressure additives to provide high load-carrying capacity
to protect heavily loaded gears from scoring and galling. It forms
a heavy, tenacious film (after solvent evaporation) that adheres
well to metal surfaces and will not harden or flake off, even at low
temperatures. This film provides good resistance to water
washout and protects against corrosion.
Open Gear Lube 595 NC is recommended for use at
temperatures above 32°F (0°C), where pumpability is not an
issue.
Features/Benefits
Excellent adhesion to metal surfaces
Forms a heavy, tenacious film to lubricate and cushion gear
teeth
Good extreme-pressure properties for protection under heavy
or shock loads
Applications:
Open and semi-enclosed gears, such as those found on
mining equipment, draglines, power shovels, ball and rod
mills, cement mills, drying kilns, and papermaking machinery
and presses
Guides and sliding surfaces with large clearances, where
asphaltic-type lubricants are specified
Cables on draglines, clamshells, shovels, hoists and other
cable-operated equipment where cable clamp safety devices
are not used
Approvals:AGMA Standard 9005-E02 Gear Type:open and semi-enclosed gears, such as those found in heavy equipment used in underground and surface mines, in rock quarries and for excavation Color:black 4 Ball Wear Scar Diameter, mm:0.50 NLGI:unavailable Lincoln Vent Meters: unavailable
