JET-LUBE's OG-H Open Gear Lubricant is made of highly refined mineral oils, a non-soap thickener, low-friction molybdenum disulphide (MoS2) and graphite, rust and corrosion inhibitors and extreme pressure additives. OG-H has excellent "stay put" qualities, will not melt or throw-off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channelling and is completely waterproof.
OG-H is a NLGI Grade 2 product, suitable for use both indoors and outdoors under extreme weather conditions. It is very tacky with high adhesive and cohesive properties. OG-H replaces ordinary residual type tarry materials and is easier to apply, requiring no heating or other preparation. Far less assuring greater economy. Uniformly dispersed low-friction ingredients give high volume strength, reduced starting torques, lower operating temperatures adn lengthened equipment life. OG-H may be applied by hand or gun.
Characteristics
- Lead Free
- Contains Molybdenum Disulphide
- Easy to Apply
- Highly Tenacious
- Lowers Operating Temperatures
- Will not Melt-Off or Pound-Out
|
Applications:
Exposed Gears: OG-H is best applied in a direct ribbon on the center of a moving gear to create uniform distribution. Apply only enough to remain between the gear teeth; excessive application is wasteful and does not necessarily improve results. Molybdenum Disulphide (MoS2) and graphite are carried intot he gear faces and moving surfaces. Score marks, pits, groves or other facial imperfections are filled and a uniform, low-friction coating is formed. Shock and noise are reduced, uneven wear prevented. Gears assume a fresh look and a appearance of having been lapped in.
Slow Moving Bearings: Use wherever high unit pressures occur in slow-moving equipment. Prevents squeeze-out, stick slip and drag. Lowers starting torques and excessive power requirements of prime movers.
Other: OG-H is used as a multipurpose lubricant on enclosed chain, wire rope and cable, ways, vertical colums, elevator tracks, journals and sleeve bearings. - any points subject to high unit pressures in slow-moving mating members.
Approvals: unavailable
Gear Type: Use OG-H on exposed gears of all types; on steam ans power winches, hoists, mill and forge equiptment, construction machinery, power shovels and dredges, edge roller gears, shovel gears, dipper sticks, pulverizers, ring gears, cams, slipper shoes, rack and pinion, herringbone, bull gears, bridge and lock gearing and many other applications.
Color: black
NLGI: 2
Lincoln Vent Meters:
unavailable
|
