Grease Buyer's Guide
Manufacturer
Brand Name
Soap/Thickener
NLGI Grade
Application
Oil Viscosity cSt at 40°C
Oil Viscosity cSt at 100°C
Dropping Point °C
Max Op Temp °C
Min Op Temp °C
Color


Alco-Metalube Grease
Manufacturer: Alco-Metalube
Brand Name: Alco-Metalube
Soap/Thickener: Lithium
NLGI Grade: 2
Application: see below
Oil Viscosity cSt at 40°C:
(Kinematic)
unavailable
Oil Viscosity cSt at 100°C:
(Kinematic)
unavailable
Dropping Point °C: 202
Max Op Temp °C: 399
Min Op Temp °C: -34
Color: green
Worked Penetration: 308
Timken OK Load lb: 80
Extreme Pressure: yes
Food Grade (NSF H1): no
Need a Quote?

Call 1.877.519.2500 or complete this form:

Package Size:
Quantity:
Timeframe:
Your Name:
Company:
Phone:
Email:
Address:
Country:
Refresh Anti-Spam Code (Will Erase Content) Reload Image

Anti-Spam Code:


The penetrating film of Alco-Metalube solves lubrication problems caused by salt water, high temperatures, heavy friction, seizing and extreme weather conditions. Alco-Metalube is an ultra duty grease that provides superior lubrication efficiency up to ten times that of ordinary Heavy-Duty lubricants, greatly reducing costly down-time while increasing the life of your expensive equipment. Alco Metalube contains a protective film (meets EPA standards) which penetrates, coats and seals with tough Extreme Pressure additives while improving torque transfer. Alco-Metalube withstands adverse conditions caused by extreme temperature, weather and pressure. Alco-Metalube is lead-free, non-synthetic and non-silicon with a hydrocarbon base.

Here’s the Alco-Metalube difference: USE A VERY SMALL AMOUNT! Why? Three reasons:
1. Alco-Metalube is highly concentrated so you need much less than ordinary lubricants.
2. Alco-Metalube is TWICE the weight of ordinary lubricants.
3. Alco-Metalube does not break down like other lubricants. Use just enough Alco-Metalube to coat the area. And that’s it!

Bottom line: Alco-Metalube greatly increases mechanical efficiency because your equipment works harder, lasts longer, and increases your profit margin.

Alco-Metalube solves problems caused by:
  • Salt water wash off
  • High temperatures
  • Friction & wear
  • Severe shock load
  • Sand, dirt & gravel penetration
  • Steam
  • Harsh Chemicals
  • Extreme variables of weather


Alco-Metalube Characteristics
  • Hydrocarbon base
  • Metallic film (Meets EPA Guidelines!)
  • Extreme Pressure additives


Alco-Metalube "INDUSTRY'S TOUGHEST LUBE" reduces:
  • Seizing
  • Corrosion
  • Galling
  • Throwing
  • Equipment Repair
  • Costly down-time
  • Prevention of stocking multiple grades


Where is it used?
  • Marine Industry
  • Petroleum Industry
  • Mining Industry
  • Agriculture Industry
  • Recycling Industry
  • Construction Industry
  • General Manufacturing
Applications:
Simply put, Alco-Metalube is used almost anywhere metal meets metal. It doesn’t matter what the conditions are-- salt water, high temperatures, sand & dirt, severe shock loads, extreme weather -- you name it, Alco-Metalube works.

    Copyright © 2010 BuyersGuide.com All rights reserved.
 Home  |  Product Links