|Chevron Multifak® EP 00
|Need a Quote?|
Call 1.877.519.2500 or complete this form:
Brand Name:|| Multiflak|
NLGI Grade:|| OO|
Application:|| see below|
Oil Viscosity cSt at 40°C:|
Oil Viscosity cSt at 100°C:|
Dropping Point °C:|| 160
Max Op Temp °C:|| 77|
Min Op Temp °C:|| -35|
Worked Penetration:|| 415
Timken OK Load lb:|| 40
Extreme Pressure:|| yes
Food Grade (NSF H1):|| no
|Chevron Multifak EP are multipurpose extreme pressure greases.
They are manufactured using selected highly refined
medium viscosity index base oils, a lithium 12-
hydroxystearate thickener, an extreme pressure
additive, and rust and oxidation inhibitors.
NLGI grade 000 is red in color and stringy in texture.
NLGI grades 00, 0, 1 and 2 are amber in color and
buttery in texture.
Chevron Multifak EP have high load-carrying capacity
and, therefore, provide good protection of lubricated
parts against wear. They provide excellent lubrication
in the presence of water, protect bearing surfaces
against corrosion, and have excellent resistance to
oxidation, which ensures long life in storage and in use.
They are work stable. They resist separation or throw
out from antifriction bearings. They have low oil
bleeding tendency under pressure and are pumpable at
- High film strength - Timken Film Test Rating
40 pounds and above indicates high load-carrying
capacity and low wear rate.
- Good water resistance - Provide lubrication in
the presence of water.
- Good corrosion protection - Inhibited to
protect bearing surfaces.
- Good oxidation stability - Helps to ensure long
life in storage and in use.
- Simplified lubrication - One grease designed to
satisfy most industrial grease requirements.
- Economy - Reduced inventory since these greases
can replace many specialized products. Reduce
chance of applying the wrong lubricant.
- Low oil bleeding tendency - Recommended for
use in centralized lubrication systems.
Applications: Chevron Multifak EP are widely accepted by the industry for use in centralized lubrication systems.
NLGI grades 00, 0, and 1 are recommended for this
Chevron Multifak EP can satisfy most industrial grease
Typical applications are:
- Plain and antifriction bearings
- Chassis lubrication
- Construction equipment
- Conveyors and run-out rolls
- Crusher, shaker, or classifier screen bearings
- General machinery lubrication
- Low and high speed plain bearings
- Roller and needle bearings
- Underground mining equipment
- Non-disc brake wheel bearings
Chevron Multifak EP are recommended for both plain
and antifriction bearings and particularly for bearings
subjected to shock loading. NLGI grades 1 and 2
comply with Timken’s recommendation for this service.
NLGI grade 000 is a semifluid grease formulated to
meet the lubrication requirements of underground
mining machinery having enclosed gear cases where
housings and seals have lost their ability to retain
conventional gear oils.
NLGI grades 1 and 2 are approved
for the NLGI Certification Mark LB.
NLGI grades 0, 1 and 2 are certified
by NSF and are acceptable as a
lubricant where there is no possibility
of food contact (H2) in and around food processing
areas. The NSF Nonfood Compounds Registration
Program is a continuation of the USDA product
approval and listing program, which is based on
meeting regulatory requirements of appropriate use,
ingredient review and labeling verification.