Chevron Ulti-Plex Synthetic Grease EP is a multipurpose, high performance grease specially formulated for extreme pressure bearing applications operating under the most extreme high and low temperature conditions and for those difficult applications requiring extended lubrication intervals. It is manufactured using selected highly refined high
viscosity synthetic base oils, a lithium complex
thickener, rust and oxidation inhibitors, and extreme
pressure and tackiness additives. It is light tan in color
and smooth and buttery in texture.
Chevron Ulti-Plex Synthetic Grease EP provides an
alternative for high temperature applications. The
uniform molecular structure of the synthetic base oils
minimizes friction between moving parts and boosts
lubrication performance over a wide temperature
range.
The high viscosity index of the synthetic base oils allow
for greater pumpability at subzero (-29°C/-20°F)
temperatures, allowing bearings lubricated with
Chevron Ulti-Plex Synthetic Grease EP to operate at
temperatures as low as -51°C (-60°F).
Features
Continuous high temperature stability up to
232°C (450°F).
Low temperature pumpability down to -29°C
(-20°F).
Low temperature lubrication down to -51°C
(-60°F).
Excellent corrosion and wear protection.
Excellent water resistance.
Extended relubrication intervals.
Applications: Chevron Ulti-Plex Synthetic Grease EP is recommended for use in applications with temperatures up to 232°C
(450°F), with a dropping point of approximately 288°C
(550°F).
Chevron Ulti-Plex Synthetic Grease EP is ideal for a
wide variety of applications across several industries,
including:
Paper and Forest Products - This lubricant is
superior for severe service applications such as:
sludge press bearings, lime kilns, pumps, woodyard
heavy equipment, Doctor oscillator bearings, felt roll
bearings, pulp refiner bearings, rope sheaves, and
exhaust fan bearings. Chevron Ulti-Plex Synthetic
Grease EP is particularly well-suited for the highest
temperature applications, such as felt roll bearings
and lime kilns operating at temperatures in excess
of 204°C (400°F).
Mining - Chevron Ulti-Plex Synthetic Grease EP is
particularly recommended for
- mining operations that involve extreme pressure
applications requiring excellent low temperature
pumpability. Applications include: pins and
bushings on buckets and loaders, shaker
screens, crushers, and conveyors
- the lowest temperature mining applications
- automatic lubricating systems in onboard
shovels, trucks, and other mobile equipment
Off-Road Construction - This grease is ideally
suited for lubrication systems that involve pumping
grease through long supply lines at low
temperatures. It also displays superior water
washout resistance properties in wet, off-road
environments.
Steel - Steel mill applications often involve
extremely high temperatures. The excellent
structural stability of Chevron Ulti-Plex Synthetic
Grease EP makes it appropriate in these situations.
Its extreme pressure properties and superior
resistance to water washout are also key in the steel
mill environment. This grease provides outstanding
protection for steel mill roll bearings, conveyors,
furnace and coiler grease points, pump bearings,
and exhaust fan bearings.
Marine - The rust and corrosion inhibition
properties of Chevron Ulti-Plex Synthetic Grease EP
make it ideal for use in marine equipment exposed
to severe corrosion environments. Examples include
deck equipment, offshore drilling equipment, grease
lubricated shaft bearings, cranes, and windlass
winches.
Chevron Ulti-Plex Synthetic Grease EP
is approved for NLGI Certification Mark
LB.
Chevron Ulti-Plex Synthetic Grease EP
is certified by NSF and is acceptable as a lubricant where there is no possibility of food contact
(H2) in and around food processing areas. The NSF
Nonfood Compounds Registration Program is a
continuation of the USDA product approval and listing
program, which is based on meeting regulatory
requirements of appropriate use, ingredient review and
labeling verification.
