All UNIREX grades have wide operating anddispensing temperature ranges with specificgrades available for either extremely hot or coldconditions.
UNIREX greases provide superior protectionagainst rust and metal corrosion as determinedusing ASTM D1743 and a 24-hour CopperCorrosion test at 100°C.
UNIREX greases have good high temperaturestability. This feature significantly extendsgreasing interval requirements.
All UNIREX EP greases contain additivescombining extreme pressure resistance and wearprotection under severe shock loadingconditions. See the Timken Load and 4-BallWear/EP data on the Typical Properties table.
UNIREX EP 1 and UNIREX EP 2 have highLoad Wear Index and Weld Point characteristicsas determined by ASTM D 2596 and areespecially recommended for the lubrication ofheavy duty ball and roller bearings in shovels,drag lines, and drills for open pit mine service.
Applications: The UNIREX EP* brand represents a line ofextremely versatile, long-life bearing greases.They are well-proven, superb performerssuitable for use in a variety of industrialapplications. They offer the following featuresand benefits:
Each of the seven grades is formulatedusing an advanced lithium complex soapthickener.
Five grades are formulated using leadingedgepolymer enrichment technology.This enhances the already excellentadhesion tendency and water washoutresistance of the product line.
Unirex brand greases continue to be thebenchmark against which other premiumquality lithium complex greases arecompared.
UNIREX LOTEMP EP grease is formulatedwith low viscosity, low pour base oils and has aNLGI consistency between 1 and 2. It isrecommended for winter conditions that requirelow operating or dispensing limits. With anoperating range of -55°C to 110°C and adispensing temperature limit of -40°C, UnirexLotemp EP grease offers a combination ofefficient start-up and reduced down-time on coldmornings plus effective summer protection.
