Molykote® 33 Light Extreme Low Temperature Bearing Grease
Need a Quote?
Call 1.877.519.2500 or complete this form:
Manufacturer:
Dow Corning
Brand Name:
Molykote
Soap/Thickener:
Lithium Soap
NLGI Grade:
1
Application:
see below
Oil Viscosity cSt at 40°C: (Kinematic)
unavailable
Oil Viscosity cSt at 100°C: (Kinematic)
unavailable
Dropping Point °C:
226
Max Op Temp °C:
204
Min Op Temp °C:
-73
Color:
white
Worked Penetration:
320
Timken OK Load lb:
unavailable
Extreme Pressure:
no
Food Grade (NSF H1):
no
Molykote® 33 Extreme Low Temperature Bearing Grease are silicone lubricating oils with thickeners added.
Molykote® 33 Extreme Low Temperature Bearing Grease is thickened with a special lithium soap. Molykote® 33 Extreme Low Temperature Bearing Grease is available in light and medium consistencies - NLGI #1 and #2.
Molykote® 33 Extreme Low Temperature Bearing Grease is USDA listed for use as a lubricant where there is no possibility of food contact.
Resistance to oxidation, moisture and corrosive atmospheres
Inertness
Good shear stability
Wide service temperature range: 33 Extreme Low Temperature Grease: -100 to 400°F (-73 to 204°C) 41 Extreme High Temperature Grease: 0 to 550°F (-18 to 288°C) 44 High Temperature Grease: -40 to 400°F (-40 to 204°C)
Compatible with many plastics
COMPOSITION
Lithium soap
Phenylmethyl silicone oil
Applications:
Freezer cart casters and cold room conveyor equipment
Oscillographs, geophysical and light, low-torque instruments
Starter clutch drives
These greases do not soften or affect most plastics and are used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts. Because of low torque requirements, Molykote® 33 Extreme Low Temperature Bearing Grease is especially effective in equipment that must start in extreme cold.
