Meat and Poultry Processing Plants, Egg Processing Plants,
Fish and Seafood Processing Plants, Breweries and Wineries,
Soft Drink and Bottling Plants, Vegetable and Fruit Processors,
Cheese and Cheese Product Producers, Bakeries,
Snack Food Manufacturers, Pasta Manufacturers,
Pet Food and Animal Feed Producers, Oil Mills and Seed Cake Processors,
Pharmaceutical and Drug Manufacturers, Cosmetic Manufacturers,
Food and Beverage Container Manufacturers, Paper and Paperboard Manufacturers,
Water Well Drillers, Drinking and Potable Water Treatment Plants
ISO Grade:
150
Biodegradeable:
no
Food Grade (NSF-H1):
yes
Low Temperature:
no
Viscosity Index:
140
Oil Viscosity, Kinematic: cSt at 40°C
cSt at 100°C
153.000 18.845
Oil Viscosity, Saybolt: SUS at 100°F
SUS at 210°F
787.000
Flash Point:
277.00
Pour Point:
-37.00
Need a Quote?
Call 1.877.519.2500 or complete this form:
Hydraulic Oil H-1 is a fully synthetic anti-wear, food grade oil that is specially
formulated for use in the lubrication of food, feed and pharmaceutical processing
and packaging equipment, especially those pieces of equipment that are
subjected to high loads and high moisture conditions.
Hydraulic Oil H-1 is blended from the highest quality, highly refined, severely
hydro-finished and purified non-toxic technical white polyalphaolefin (PAO)
synthetic base fluids available. These technical white PAO synthetic base fluids
provide Hydraulic Oil H-1 with the following advantages:
Excellent resistance to thermal degradation
Superior oxidative stability
Low Volatility – this results in less make-up requirements due to
evaporation loss.
A high viscosity index – this results in a minimum change in viscosity
with temperature.
Excellent cold temperature starting and pumpability
Greater hydrolytic stability and demulsibility characteristics
Excellent resistance to acidic compounds.
Non-toxic -- meets the United States Food and Drug Administration’s
requirements for synthetic technical white mineral oils.
Excellent operating temperature reduction
Compatibility with all types of seals and coatings
Extended drain intervals
Blended into the technical white PAO synthetic base fluids is a highly specialized
non-toxic food grade approved additive package and a food grade
antimicrobicide which provides the Hydraulic Oil H-1 with the following
outstanding performance features.
Exceptional anti-wear and load carrying capabilities
Excellent rust and corrosion inhibition
Enhanced oxidation stability
Excellent anti-foam and air release properties
Enhanced oxidation stability
Protection against rancidity and build up due to bacterial and fungal
growth.
Approvals: Hydraulic Oil H-1 meets the requirements for a USDA H-1 quality lubricant and
the requirements of the United States Code of Federal Regulations 21CFR
178.3570, 178.3620(b), and 573.680 of the United States Food and Drug
Administration’s Regulations. Applications: Hydraulic Oil H-1 can be used in the lubrication of all types of compressor
applications including some types of refrigeration compressors, hydraulic,
vacuum pump, pump, air line, chain, bearing, general oiling and heat transfer
applications where there is a chance of incidental contact with food, foodstuffs,
drinking water, potable water, or ground water may occur. Machine Applications: food, feed and pharmaceutical processing and packaging equipment
