Red Line Synthetic Automatic Transmission Fluids are designed to provide excellent low-temperature shiftability and improved thermal stability. The products identified
as Synthetic ATF, Synthetic D4 ATF, Synthetic D6 ATF,and Synthetic C+ ATF have better thermal stability and lower volatility characteristics than a petroleum ATF and
provides a much lower viscosity at lower temperatures, providing much quicker shifting in cold weather. The balanced frictional characteristics provides smooth and
consistent shifts for extended drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and
clutches which leads to transmission failure.
Applications: Synthetic High-Temp ATF provides the gear protection of a GL-4 gear oil in an ATF and provides a higher viscosity at higher operating temperatures, allowing the
transmission to operate at 70°F higher temperature and still provide the optimal shiftability and improved torque converter efficiency. The evaporation characteristics are
significantly improved, being twice as good as our Synthetic ATF and five-times better than a petroleum ATF. The improved thermal stability significantly reduces the
rapid evaporation of the ATF which can produce a frothing out the filler tube. The balanced frictional characteristics provides smooth and consistent shifts for extended
drain intervals. The superior stability compared to petroleum ATFs allows high-temperature operation without varnishing valves and clutches which leads to transmission
failure. High-Temp ATF is perfect for heavily-loaded vehicles which see high temperatures and automatic transaxles which are benefitted by the extreme-pressure
protection of a GL-4 gear oil to lubricate the final drive. This product can be used in manual transmissions which require ATFs and will provide much better gear
protection than a petroleum ATF; however, MTL® will provide better wear protection and better low-temperature shiftability in most manual transmissions which call for
an ATF. High-Temp ATF is suitable for use in automatic and manual transmissions and transaxles where Dexron III, Dexron II or Mercon is recommended.
Perfect for heavily-loaded vehicles like motor homes and towing applications due to its higher viscosity than our D4 ATF. This is a synthetic ATF for use where Dexron III or Mercon is recommended.
This product provides the gear protection of a GL-4 gear oil in an ATF and provides a higher viscosity at higher operating temperatures, allowing the transmission to operate at 70°F higher temperature and still provide the optimal shiftability and improved torque converter efficiency.
Approvals: Dexron III, Mercon, Mercon V, Toyota T-IV, APL G-4
Click hereto view this product's Data Sheet. Click hereto print product data.
